Warning! Contract bytecode has been changed and doesn't match the verified one. Therefore, interaction with this smart contract may be risky.
- Contract name:
- StrategyCurveSolidly
- Optimization enabled
- true
- Compiler version
- v0.8.15+commit.e14f2714
- Optimization runs
- 200
- Verified at
- 2023-07-11T00:17:43.901395Z
contracts/BIFI/strategies/Curve/StrategyCurveSolidly.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "@openzeppelin-4/contracts/token/ERC20/ERC20.sol"; import "@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol"; import "../../interfaces/common/ISolidlyRouter.sol"; import "../../interfaces/common/IWrappedNative.sol"; import "../../interfaces/curve/ICurveSwap.sol"; import "../../interfaces/curve/IGaugeFactory.sol"; import "../../interfaces/curve/IRewardsGauge.sol"; import "../Common/StratFeeManagerInitializable.sol"; contract StrategyCurveSolidly is StratFeeManagerInitializable { using SafeERC20 for IERC20; // Tokens used address public want; // curve lpToken address public native; address public output; address public depositToken; // Third party contracts address public rewardsGauge; address public pool; uint public poolSize; uint public depositIndex; bool public useUnderlying; bool public useMetapool; // Routes ISolidlyRouter.Routes[] public nativeToDepositRoute; bool public harvestOnDeposit; uint256 public lastHarvest; event StratHarvest(address indexed harvester, uint256 wantHarvested, uint256 tvl); event Deposit(uint256 tvl); event Withdraw(uint256 tvl); event ChargedFees(uint256 callFees, uint256 beefyFees, uint256 strategistFees); function initialize( address _want, address _gauge, address _pool, uint[] memory _params, // [poolSize, depositIndex, useUnderlying, useMetapool] ISolidlyRouter.Routes[] calldata _nativeToDeposit, CommonAddresses calldata _commonAddresses ) public initializer { __StratFeeManager_init(_commonAddresses); want = _want; rewardsGauge = _gauge; pool = _pool; poolSize = _params[0]; depositIndex = _params[1]; useUnderlying = _params[2] > 0; useMetapool = _params[3] > 0; for (uint i; i < _nativeToDeposit.length; ++i) { nativeToDepositRoute.push(_nativeToDeposit[i]); } native = _nativeToDeposit[0].from; depositToken = _nativeToDeposit[_nativeToDeposit.length - 1].to; output = native; _giveAllowances(); } // puts the funds to work function deposit() public whenNotPaused { uint256 wantBal = IERC20(want).balanceOf(address(this)); if (wantBal > 0) { IRewardsGauge(rewardsGauge).deposit(wantBal); emit Deposit(balanceOf()); } } function withdraw(uint256 _amount) external { require(msg.sender == vault, "!vault"); uint256 wantBal = IERC20(want).balanceOf(address(this)); if (wantBal < _amount) { IRewardsGauge(rewardsGauge).withdraw(_amount - wantBal); wantBal = IERC20(want).balanceOf(address(this)); } if (wantBal > _amount) { wantBal = _amount; } if (tx.origin != owner() && !paused()) { uint256 withdrawalFeeAmount = wantBal * withdrawalFee / WITHDRAWAL_MAX; wantBal = wantBal - withdrawalFeeAmount; } IERC20(want).safeTransfer(vault, wantBal); emit Withdraw(balanceOf()); } function beforeDeposit() external override { if (harvestOnDeposit) { require(msg.sender == vault, "!vault"); _harvest(tx.origin); } } function harvest() external virtual { _harvest(tx.origin); } function harvest(address callFeeRecipient) external virtual { _harvest(callFeeRecipient); } // compounds earnings and charges performance fee function _harvest(address callFeeRecipient) internal whenNotPaused { IRewardsGauge(rewardsGauge).claim_rewards(address(this)); uint256 nativeBal = IERC20(native).balanceOf(address(this)); if (nativeBal > 0) { chargeFees(callFeeRecipient); addLiquidity(); uint256 wantHarvested = balanceOfWant(); deposit(); lastHarvest = block.timestamp; emit StratHarvest(msg.sender, wantHarvested, balanceOf()); } } // performance fees function chargeFees(address callFeeRecipient) internal { IFeeConfig.FeeCategory memory fees = getFees(); uint256 nativeBal = IERC20(native).balanceOf(address(this)) * fees.total / DIVISOR; uint256 callFeeAmount = nativeBal * fees.call / DIVISOR; IERC20(native).safeTransfer(callFeeRecipient, callFeeAmount); uint256 beefyFeeAmount = nativeBal * fees.beefy / DIVISOR; IERC20(native).safeTransfer(beefyFeeRecipient, beefyFeeAmount); uint256 strategistFeeAmount = nativeBal * fees.strategist / DIVISOR; IERC20(native).safeTransfer(strategist, strategistFeeAmount); emit ChargedFees(callFeeAmount, beefyFeeAmount, strategistFeeAmount); } // Adds liquidity to AMM and gets more LP tokens. function addLiquidity() internal { uint256 nativeBal = IERC20(native).balanceOf(address(this)); if (depositToken != native) { ISolidlyRouter(unirouter).swapExactTokensForTokens(nativeBal, 0, nativeToDepositRoute, address(this), block.timestamp); } uint256 depositBal = IERC20(depositToken).balanceOf(address(this)); if (poolSize == 2) { uint256[2] memory amounts; amounts[depositIndex] = depositBal; if (useUnderlying) ICurveSwap(pool).add_liquidity(amounts, 0, true); } else if (poolSize == 3) { uint256[3] memory amounts; amounts[depositIndex] = depositBal; if (useUnderlying) ICurveSwap(pool).add_liquidity(amounts, 0, true); else if (useMetapool) ICurveSwap(pool).add_liquidity(want, amounts, 0); else ICurveSwap(pool).add_liquidity(amounts, 0); } else if (poolSize == 4) { uint256[4] memory amounts; amounts[depositIndex] = depositBal; if (useMetapool) ICurveSwap(pool).add_liquidity(want, amounts, 0); else ICurveSwap(pool).add_liquidity(amounts, 0); } else if (poolSize == 5) { uint256[5] memory amounts; amounts[depositIndex] = depositBal; ICurveSwap(pool).add_liquidity(amounts, 0); } } // calculate the total underlaying 'want' held by the strat. function balanceOf() public view returns (uint256) { return balanceOfWant() + balanceOfPool(); } // it calculates how much 'want' this contract holds. function balanceOfWant() public view returns (uint256) { return IERC20(want).balanceOf(address(this)); } // it calculates how much 'want' the strategy has working in the farm. function balanceOfPool() public view returns (uint256) { return IRewardsGauge(rewardsGauge).balanceOf(address(this)); } function nativeToDeposit() external view returns (address[] memory) { return _solidlyToRoute(nativeToDepositRoute); } function setHarvestOnDeposit(bool _harvestOnDeposit) external onlyManager { harvestOnDeposit = _harvestOnDeposit; if (harvestOnDeposit) { setWithdrawalFee(0); } else { setWithdrawalFee(10); } } // returns rewards unharvested function rewardsAvailable() public view returns (uint256) { return IRewardsGauge(rewardsGauge).claimable_reward(address(this), output); } // native reward amount for calling harvest function callReward() public view returns (uint256) { IFeeConfig.FeeCategory memory fees = getFees(); return rewardsAvailable() * fees.total / DIVISOR * fees.call / DIVISOR; } // called as part of strat migration. Sends all the available funds back to the vault. function retireStrat() external { require(msg.sender == vault, "!vault"); IRewardsGauge(rewardsGauge).withdraw(balanceOfPool()); uint256 wantBal = IERC20(want).balanceOf(address(this)); IERC20(want).transfer(vault, wantBal); } // pauses deposits and withdraws all funds from third party systems. function panic() public onlyManager { pause(); IRewardsGauge(rewardsGauge).withdraw(balanceOfPool()); } function pause() public onlyManager { _pause(); _removeAllowances(); } function unpause() external onlyManager { _unpause(); _giveAllowances(); deposit(); } function _giveAllowances() internal { IERC20(want).safeApprove(rewardsGauge, type(uint).max); IERC20(native).safeApprove(unirouter, type(uint).max); IERC20(depositToken).safeApprove(pool, type(uint).max); IERC20(output).safeApprove(unirouter, 0); IERC20(output).safeApprove(unirouter, type(uint).max); } function _removeAllowances() internal { IERC20(want).safeApprove(rewardsGauge, 0); IERC20(native).safeApprove(unirouter, 0); IERC20(output).safeApprove(unirouter, 0); IERC20(depositToken).safeApprove(pool, 0); } function _solidlyToRoute(ISolidlyRouter.Routes[] memory _route) internal pure returns (address[] memory) { address[] memory route = new address[](_route.length + 1); route[0] = _route[0].from; for (uint i; i < _route.length; ++i) { route[i + 1] = _route[i].to; } return route; } receive () external payable {} }
@openzeppelin-4/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol) pragma solidity ^0.8.0; import "./IERC20.sol"; import "./extensions/IERC20Metadata.sol"; import "../../utils/Context.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * The default value of {decimals} is 18. To select a different value for * {decimals} you should overload it. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless this function is * overridden; * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom( address from, address to, uint256 amount ) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer( address from, address to, uint256 amount ) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance( address owner, address spender, uint256 amount ) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer( address from, address to, uint256 amount ) internal virtual {} }
contracts/BIFI/interfaces/curve/ICurveSwap.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface ICurveSwap { function remove_liquidity_one_coin(uint256 token_amount, int128 i, uint256 min_amount) external; function remove_liquidity_one_coin(address _pool, uint256 token_amount, int128 i, uint256 min_amount) external; function calc_withdraw_one_coin(uint256 tokenAmount, int128 i) external view returns (uint256); function coins(uint256 arg0) external view returns (address); function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount, bool _use_underlying) external; function add_liquidity(address _pool, uint256[2] memory amounts, uint256 min_mint_amount) external; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount, bool _use_underlying) external payable; function add_liquidity(address _pool, uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[6] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[6] memory amounts, uint256 min_mint_amount) external payable; function remove_liquidity(uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[6] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[6] memory min_amounts) external; function exchange(uint256 i, uint256 j, uint256 dx, uint256 min_dy) external; function balances(uint256 i) external view returns (uint256); function totalSupply() external view returns (uint256); }
contracts/BIFI/interfaces/curve/IGaugeFactory.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface IGaugeFactory { function mint(address _gauge) external; }
contracts/BIFI/interfaces/curve/IRewardsGauge.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IRewardsGauge { function balanceOf(address account) external view returns (uint256); function claimable_reward(address _addr, address _token) external view returns (uint256); function claim_rewards(address _addr) external; function claim_rewards() external; function deposit(uint256 _value) external; function withdraw(uint256 _value) external; function reward_contract() external view returns (address); function bal_pseudo_minter() external view returns (address); }
@openzeppelin-4/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 amount ) external returns (bool); }
@openzeppelin-4/contracts/token/ERC20/extensions/IERC20Metadata.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; /** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */ interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8); }
@openzeppelin-4/contracts/token/ERC20/extensions/draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/draft-IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender) + value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); uint256 newAllowance = oldAllowance - value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } } function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
@openzeppelin-4/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin-4/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } }
@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ function __Ownable_init() internal onlyInitializing { __Ownable_init_unchained(); } function __Ownable_init_unchained() internal onlyInitializing { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol) pragma solidity ^0.8.2; import "../../utils/AddressUpgradeable.sol"; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ``` * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. * @custom:oz-retyped-from bool */ uint8 private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint8 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a * constructor. * * Emits an {Initialized} event. */ modifier initializer() { bool isTopLevelCall = !_initializing; require( (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1), "Initializable: contract is already initialized" ); _initialized = 1; if (isTopLevelCall) { _initializing = true; } _; if (isTopLevelCall) { _initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: setting the version to 255 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint8 version) { require(!_initializing && _initialized < version, "Initializable: contract is already initialized"); _initialized = version; _initializing = true; _; _initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { require(_initializing, "Initializable: contract is not initializing"); _; } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { require(!_initializing, "Initializable: contract is initializing"); if (_initialized < type(uint8).max) { _initialized = type(uint8).max; emit Initialized(type(uint8).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint8) { return _initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _initializing; } }
@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which allows children to implement an emergency stop * mechanism that can be triggered by an authorized account. * * This module is used through inheritance. It will make available the * modifiers `whenNotPaused` and `whenPaused`, which can be applied to * the functions of your contract. Note that they will not be pausable by * simply including this module, only once the modifiers are put in place. */ abstract contract PausableUpgradeable is Initializable, ContextUpgradeable { /** * @dev Emitted when the pause is triggered by `account`. */ event Paused(address account); /** * @dev Emitted when the pause is lifted by `account`. */ event Unpaused(address account); bool private _paused; /** * @dev Initializes the contract in unpaused state. */ function __Pausable_init() internal onlyInitializing { __Pausable_init_unchained(); } function __Pausable_init_unchained() internal onlyInitializing { _paused = false; } /** * @dev Modifier to make a function callable only when the contract is not paused. * * Requirements: * * - The contract must not be paused. */ modifier whenNotPaused() { _requireNotPaused(); _; } /** * @dev Modifier to make a function callable only when the contract is paused. * * Requirements: * * - The contract must be paused. */ modifier whenPaused() { _requirePaused(); _; } /** * @dev Returns true if the contract is paused, and false otherwise. */ function paused() public view virtual returns (bool) { return _paused; } /** * @dev Throws if the contract is paused. */ function _requireNotPaused() internal view virtual { require(!paused(), "Pausable: paused"); } /** * @dev Throws if the contract is not paused. */ function _requirePaused() internal view virtual { require(paused(), "Pausable: not paused"); } /** * @dev Triggers stopped state. * * Requirements: * * - The contract must not be paused. */ function _pause() internal virtual whenNotPaused { _paused = true; emit Paused(_msgSender()); } /** * @dev Returns to normal state. * * Requirements: * * - The contract must be paused. */ function _unpause() internal virtual whenPaused { _paused = false; emit Unpaused(_msgSender()); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; import "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[50] private __gap; }
contracts/BIFI/interfaces/common/IFeeConfig.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; interface IFeeConfig { struct FeeCategory { uint256 total; uint256 beefy; uint256 call; uint256 strategist; string label; bool active; } struct AllFees { FeeCategory performance; uint256 deposit; uint256 withdraw; } function getFees(address strategy) external view returns (FeeCategory memory); function stratFeeId(address strategy) external view returns (uint256); function setStratFeeId(uint256 feeId) external; }
contracts/BIFI/interfaces/common/ISolidlyRouter.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; pragma experimental ABIEncoderV2; interface ISolidlyRouter { // Routes struct Routes { address from; address to; bool stable; } struct Route { address from; address to; bool stable; address factory; } function addLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, bool stable, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, bool stable, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, bool stable, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokensSimple( uint amountIn, uint amountOutMin, address tokenFrom, address tokenTo, bool stable, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Routes[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Route[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function getAmountOut(uint amountIn, address tokenIn, address tokenOut) external view returns (uint amount, bool stable); function getAmountsOut(uint amountIn, Routes[] memory routes) external view returns (uint[] memory amounts); function getAmountsOut(uint amountIn, Route[] memory routes) external view returns (uint[] memory amounts); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, address _factory, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function defaultFactory() external view returns (address); }
contracts/BIFI/interfaces/common/IWrappedNative.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IWrappedNative { function deposit() external payable; function withdraw(uint256 wad) external; }
contracts/BIFI/strategies/Common/StratFeeManagerInitializable.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol"; import "../../interfaces/common/IFeeConfig.sol"; contract StratFeeManagerInitializable is OwnableUpgradeable, PausableUpgradeable { struct CommonAddresses { address vault; address unirouter; address keeper; address strategist; address beefyFeeRecipient; address beefyFeeConfig; } // common addresses for the strategy address public vault; address public unirouter; address public keeper; address public strategist; address public beefyFeeRecipient; IFeeConfig public beefyFeeConfig; uint256 constant DIVISOR = 1 ether; uint256 constant public WITHDRAWAL_FEE_CAP = 50; uint256 constant public WITHDRAWAL_MAX = 10000; uint256 internal withdrawalFee; event SetStratFeeId(uint256 feeId); event SetWithdrawalFee(uint256 withdrawalFee); event SetVault(address vault); event SetUnirouter(address unirouter); event SetKeeper(address keeper); event SetStrategist(address strategist); event SetBeefyFeeRecipient(address beefyFeeRecipient); event SetBeefyFeeConfig(address beefyFeeConfig); function __StratFeeManager_init(CommonAddresses calldata _commonAddresses) internal onlyInitializing { __Ownable_init(); __Pausable_init(); vault = _commonAddresses.vault; unirouter = _commonAddresses.unirouter; keeper = _commonAddresses.keeper; strategist = _commonAddresses.strategist; beefyFeeRecipient = _commonAddresses.beefyFeeRecipient; beefyFeeConfig = IFeeConfig(_commonAddresses.beefyFeeConfig); withdrawalFee = 10; } // checks that caller is either owner or keeper. modifier onlyManager() { require(msg.sender == owner() || msg.sender == keeper, "!manager"); _; } // fetch fees from config contract function getFees() internal view returns (IFeeConfig.FeeCategory memory) { return beefyFeeConfig.getFees(address(this)); } // fetch fees from config contract and dynamic deposit/withdraw fees function getAllFees() external view returns (IFeeConfig.AllFees memory) { return IFeeConfig.AllFees(getFees(), depositFee(), withdrawFee()); } function getStratFeeId() external view returns (uint256) { return beefyFeeConfig.stratFeeId(address(this)); } function setStratFeeId(uint256 _feeId) external onlyManager { beefyFeeConfig.setStratFeeId(_feeId); emit SetStratFeeId(_feeId); } // adjust withdrawal fee function setWithdrawalFee(uint256 _fee) public onlyManager { require(_fee <= WITHDRAWAL_FEE_CAP, "!cap"); withdrawalFee = _fee; emit SetWithdrawalFee(_fee); } // set new vault (only for strategy upgrades) function setVault(address _vault) external onlyOwner { vault = _vault; emit SetVault(_vault); } // set new unirouter function setUnirouter(address _unirouter) external onlyOwner { unirouter = _unirouter; emit SetUnirouter(_unirouter); } // set new keeper to manage strat function setKeeper(address _keeper) external onlyManager { keeper = _keeper; emit SetKeeper(_keeper); } // set new strategist address to receive strat fees function setStrategist(address _strategist) external { require(msg.sender == strategist, "!strategist"); strategist = _strategist; emit SetStrategist(_strategist); } // set new beefy fee address to receive beefy fees function setBeefyFeeRecipient(address _beefyFeeRecipient) external onlyOwner { beefyFeeRecipient = _beefyFeeRecipient; emit SetBeefyFeeRecipient(_beefyFeeRecipient); } // set new fee config address to fetch fees function setBeefyFeeConfig(address _beefyFeeConfig) external onlyOwner { beefyFeeConfig = IFeeConfig(_beefyFeeConfig); emit SetBeefyFeeConfig(_beefyFeeConfig); } function depositFee() public virtual view returns (uint256) { return 0; } function withdrawFee() public virtual view returns (uint256) { return paused() ? 0 : withdrawalFee; } function beforeDeposit() external virtual {} }
@openzeppelin-4/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol) pragma solidity ^0.8.0; import "./IERC20.sol"; import "./extensions/IERC20Metadata.sol"; import "../../utils/Context.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * The default value of {decimals} is 18. To select a different value for * {decimals} you should overload it. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless this function is * overridden; * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom( address from, address to, uint256 amount ) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer( address from, address to, uint256 amount ) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance( address owner, address spender, uint256 amount ) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer( address from, address to, uint256 amount ) internal virtual {} }
contracts/BIFI/interfaces/curve/ICurveSwap.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface ICurveSwap { function remove_liquidity_one_coin(uint256 token_amount, int128 i, uint256 min_amount) external; function remove_liquidity_one_coin(address _pool, uint256 token_amount, int128 i, uint256 min_amount) external; function calc_withdraw_one_coin(uint256 tokenAmount, int128 i) external view returns (uint256); function coins(uint256 arg0) external view returns (address); function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount, bool _use_underlying) external; function add_liquidity(address _pool, uint256[2] memory amounts, uint256 min_mint_amount) external; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount, bool _use_underlying) external payable; function add_liquidity(address _pool, uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[6] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[6] memory amounts, uint256 min_mint_amount) external payable; function remove_liquidity(uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[6] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[6] memory min_amounts) external; function exchange(uint256 i, uint256 j, uint256 dx, uint256 min_dy) external; function balances(uint256 i) external view returns (uint256); function totalSupply() external view returns (uint256); }
contracts/BIFI/interfaces/curve/IGaugeFactory.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface IGaugeFactory { function mint(address _gauge) external; }
contracts/BIFI/interfaces/curve/IRewardsGauge.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IRewardsGauge { function balanceOf(address account) external view returns (uint256); function claimable_reward(address _addr, address _token) external view returns (uint256); function claim_rewards(address _addr) external; function claim_rewards() external; function deposit(uint256 _value) external; function withdraw(uint256 _value) external; function reward_contract() external view returns (address); function bal_pseudo_minter() external view returns (address); }
@openzeppelin-4/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 amount ) external returns (bool); }
@openzeppelin-4/contracts/token/ERC20/extensions/IERC20Metadata.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; /** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */ interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8); }
@openzeppelin-4/contracts/token/ERC20/extensions/draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/draft-IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender) + value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); uint256 newAllowance = oldAllowance - value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } } function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
@openzeppelin-4/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin-4/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } }
@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ function __Ownable_init() internal onlyInitializing { __Ownable_init_unchained(); } function __Ownable_init_unchained() internal onlyInitializing { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol) pragma solidity ^0.8.2; import "../../utils/AddressUpgradeable.sol"; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ``` * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. * @custom:oz-retyped-from bool */ uint8 private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint8 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a * constructor. * * Emits an {Initialized} event. */ modifier initializer() { bool isTopLevelCall = !_initializing; require( (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1), "Initializable: contract is already initialized" ); _initialized = 1; if (isTopLevelCall) { _initializing = true; } _; if (isTopLevelCall) { _initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: setting the version to 255 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint8 version) { require(!_initializing && _initialized < version, "Initializable: contract is already initialized"); _initialized = version; _initializing = true; _; _initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { require(_initializing, "Initializable: contract is not initializing"); _; } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { require(!_initializing, "Initializable: contract is initializing"); if (_initialized < type(uint8).max) { _initialized = type(uint8).max; emit Initialized(type(uint8).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint8) { return _initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _initializing; } }
@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which allows children to implement an emergency stop * mechanism that can be triggered by an authorized account. * * This module is used through inheritance. It will make available the * modifiers `whenNotPaused` and `whenPaused`, which can be applied to * the functions of your contract. Note that they will not be pausable by * simply including this module, only once the modifiers are put in place. */ abstract contract PausableUpgradeable is Initializable, ContextUpgradeable { /** * @dev Emitted when the pause is triggered by `account`. */ event Paused(address account); /** * @dev Emitted when the pause is lifted by `account`. */ event Unpaused(address account); bool private _paused; /** * @dev Initializes the contract in unpaused state. */ function __Pausable_init() internal onlyInitializing { __Pausable_init_unchained(); } function __Pausable_init_unchained() internal onlyInitializing { _paused = false; } /** * @dev Modifier to make a function callable only when the contract is not paused. * * Requirements: * * - The contract must not be paused. */ modifier whenNotPaused() { _requireNotPaused(); _; } /** * @dev Modifier to make a function callable only when the contract is paused. * * Requirements: * * - The contract must be paused. */ modifier whenPaused() { _requirePaused(); _; } /** * @dev Returns true if the contract is paused, and false otherwise. */ function paused() public view virtual returns (bool) { return _paused; } /** * @dev Throws if the contract is paused. */ function _requireNotPaused() internal view virtual { require(!paused(), "Pausable: paused"); } /** * @dev Throws if the contract is not paused. */ function _requirePaused() internal view virtual { require(paused(), "Pausable: not paused"); } /** * @dev Triggers stopped state. * * Requirements: * * - The contract must not be paused. */ function _pause() internal virtual whenNotPaused { _paused = true; emit Paused(_msgSender()); } /** * @dev Returns to normal state. * * Requirements: * * - The contract must be paused. */ function _unpause() internal virtual whenPaused { _paused = false; emit Unpaused(_msgSender()); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; import "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[50] private __gap; }
contracts/BIFI/interfaces/common/IFeeConfig.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; interface IFeeConfig { struct FeeCategory { uint256 total; uint256 beefy; uint256 call; uint256 strategist; string label; bool active; } struct AllFees { FeeCategory performance; uint256 deposit; uint256 withdraw; } function getFees(address strategy) external view returns (FeeCategory memory); function stratFeeId(address strategy) external view returns (uint256); function setStratFeeId(uint256 feeId) external; }
contracts/BIFI/interfaces/common/ISolidlyRouter.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; pragma experimental ABIEncoderV2; interface ISolidlyRouter { // Routes struct Routes { address from; address to; bool stable; } struct Route { address from; address to; bool stable; address factory; } function addLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, bool stable, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, bool stable, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, bool stable, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokensSimple( uint amountIn, uint amountOutMin, address tokenFrom, address tokenTo, bool stable, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Routes[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Route[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function getAmountOut(uint amountIn, address tokenIn, address tokenOut) external view returns (uint amount, bool stable); function getAmountsOut(uint amountIn, Routes[] memory routes) external view returns (uint[] memory amounts); function getAmountsOut(uint amountIn, Route[] memory routes) external view returns (uint[] memory amounts); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, address _factory, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function defaultFactory() external view returns (address); }
contracts/BIFI/interfaces/common/IWrappedNative.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IWrappedNative { function deposit() external payable; function withdraw(uint256 wad) external; }
contracts/BIFI/strategies/Common/StratFeeManagerInitializable.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol"; import "../../interfaces/common/IFeeConfig.sol"; contract StratFeeManagerInitializable is OwnableUpgradeable, PausableUpgradeable { struct CommonAddresses { address vault; address unirouter; address keeper; address strategist; address beefyFeeRecipient; address beefyFeeConfig; } // common addresses for the strategy address public vault; address public unirouter; address public keeper; address public strategist; address public beefyFeeRecipient; IFeeConfig public beefyFeeConfig; uint256 constant DIVISOR = 1 ether; uint256 constant public WITHDRAWAL_FEE_CAP = 50; uint256 constant public WITHDRAWAL_MAX = 10000; uint256 internal withdrawalFee; event SetStratFeeId(uint256 feeId); event SetWithdrawalFee(uint256 withdrawalFee); event SetVault(address vault); event SetUnirouter(address unirouter); event SetKeeper(address keeper); event SetStrategist(address strategist); event SetBeefyFeeRecipient(address beefyFeeRecipient); event SetBeefyFeeConfig(address beefyFeeConfig); function __StratFeeManager_init(CommonAddresses calldata _commonAddresses) internal onlyInitializing { __Ownable_init(); __Pausable_init(); vault = _commonAddresses.vault; unirouter = _commonAddresses.unirouter; keeper = _commonAddresses.keeper; strategist = _commonAddresses.strategist; beefyFeeRecipient = _commonAddresses.beefyFeeRecipient; beefyFeeConfig = IFeeConfig(_commonAddresses.beefyFeeConfig); withdrawalFee = 10; } // checks that caller is either owner or keeper. modifier onlyManager() { require(msg.sender == owner() || msg.sender == keeper, "!manager"); _; } // fetch fees from config contract function getFees() internal view returns (IFeeConfig.FeeCategory memory) { return beefyFeeConfig.getFees(address(this)); } // fetch fees from config contract and dynamic deposit/withdraw fees function getAllFees() external view returns (IFeeConfig.AllFees memory) { return IFeeConfig.AllFees(getFees(), depositFee(), withdrawFee()); } function getStratFeeId() external view returns (uint256) { return beefyFeeConfig.stratFeeId(address(this)); } function setStratFeeId(uint256 _feeId) external onlyManager { beefyFeeConfig.setStratFeeId(_feeId); emit SetStratFeeId(_feeId); } // adjust withdrawal fee function setWithdrawalFee(uint256 _fee) public onlyManager { require(_fee <= WITHDRAWAL_FEE_CAP, "!cap"); withdrawalFee = _fee; emit SetWithdrawalFee(_fee); } // set new vault (only for strategy upgrades) function setVault(address _vault) external onlyOwner { vault = _vault; emit SetVault(_vault); } // set new unirouter function setUnirouter(address _unirouter) external onlyOwner { unirouter = _unirouter; emit SetUnirouter(_unirouter); } // set new keeper to manage strat function setKeeper(address _keeper) external onlyManager { keeper = _keeper; emit SetKeeper(_keeper); } // set new strategist address to receive strat fees function setStrategist(address _strategist) external { require(msg.sender == strategist, "!strategist"); strategist = _strategist; emit SetStrategist(_strategist); } // set new beefy fee address to receive beefy fees function setBeefyFeeRecipient(address _beefyFeeRecipient) external onlyOwner { beefyFeeRecipient = _beefyFeeRecipient; emit SetBeefyFeeRecipient(_beefyFeeRecipient); } // set new fee config address to fetch fees function setBeefyFeeConfig(address _beefyFeeConfig) external onlyOwner { beefyFeeConfig = IFeeConfig(_beefyFeeConfig); emit SetBeefyFeeConfig(_beefyFeeConfig); } function depositFee() public virtual view returns (uint256) { return 0; } function withdrawFee() public virtual view returns (uint256) { return paused() ? 0 : withdrawalFee; } function beforeDeposit() external virtual {} }
@openzeppelin-4/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol) pragma solidity ^0.8.0; import "./IERC20.sol"; import "./extensions/IERC20Metadata.sol"; import "../../utils/Context.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * The default value of {decimals} is 18. To select a different value for * {decimals} you should overload it. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless this function is * overridden; * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom( address from, address to, uint256 amount ) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer( address from, address to, uint256 amount ) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance( address owner, address spender, uint256 amount ) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer( address from, address to, uint256 amount ) internal virtual {} }
contracts/BIFI/interfaces/curve/ICurveSwap.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface ICurveSwap { function remove_liquidity_one_coin(uint256 token_amount, int128 i, uint256 min_amount) external; function remove_liquidity_one_coin(address _pool, uint256 token_amount, int128 i, uint256 min_amount) external; function calc_withdraw_one_coin(uint256 tokenAmount, int128 i) external view returns (uint256); function coins(uint256 arg0) external view returns (address); function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount, bool _use_underlying) external; function add_liquidity(address _pool, uint256[2] memory amounts, uint256 min_mint_amount) external; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount, bool _use_underlying) external payable; function add_liquidity(address _pool, uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[6] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[6] memory amounts, uint256 min_mint_amount) external payable; function remove_liquidity(uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[6] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[6] memory min_amounts) external; function exchange(uint256 i, uint256 j, uint256 dx, uint256 min_dy) external; function balances(uint256 i) external view returns (uint256); function totalSupply() external view returns (uint256); }
contracts/BIFI/interfaces/curve/IGaugeFactory.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface IGaugeFactory { function mint(address _gauge) external; }
contracts/BIFI/interfaces/curve/IRewardsGauge.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IRewardsGauge { function balanceOf(address account) external view returns (uint256); function claimable_reward(address _addr, address _token) external view returns (uint256); function claim_rewards(address _addr) external; function claim_rewards() external; function deposit(uint256 _value) external; function withdraw(uint256 _value) external; function reward_contract() external view returns (address); function bal_pseudo_minter() external view returns (address); }
@openzeppelin-4/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 amount ) external returns (bool); }
@openzeppelin-4/contracts/token/ERC20/extensions/IERC20Metadata.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; /** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */ interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8); }
@openzeppelin-4/contracts/token/ERC20/extensions/draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/draft-IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender) + value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); uint256 newAllowance = oldAllowance - value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } } function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
@openzeppelin-4/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin-4/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } }
@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ function __Ownable_init() internal onlyInitializing { __Ownable_init_unchained(); } function __Ownable_init_unchained() internal onlyInitializing { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol) pragma solidity ^0.8.2; import "../../utils/AddressUpgradeable.sol"; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ``` * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. * @custom:oz-retyped-from bool */ uint8 private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint8 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a * constructor. * * Emits an {Initialized} event. */ modifier initializer() { bool isTopLevelCall = !_initializing; require( (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1), "Initializable: contract is already initialized" ); _initialized = 1; if (isTopLevelCall) { _initializing = true; } _; if (isTopLevelCall) { _initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: setting the version to 255 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint8 version) { require(!_initializing && _initialized < version, "Initializable: contract is already initialized"); _initialized = version; _initializing = true; _; _initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { require(_initializing, "Initializable: contract is not initializing"); _; } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { require(!_initializing, "Initializable: contract is initializing"); if (_initialized < type(uint8).max) { _initialized = type(uint8).max; emit Initialized(type(uint8).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint8) { return _initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _initializing; } }
@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which allows children to implement an emergency stop * mechanism that can be triggered by an authorized account. * * This module is used through inheritance. It will make available the * modifiers `whenNotPaused` and `whenPaused`, which can be applied to * the functions of your contract. Note that they will not be pausable by * simply including this module, only once the modifiers are put in place. */ abstract contract PausableUpgradeable is Initializable, ContextUpgradeable { /** * @dev Emitted when the pause is triggered by `account`. */ event Paused(address account); /** * @dev Emitted when the pause is lifted by `account`. */ event Unpaused(address account); bool private _paused; /** * @dev Initializes the contract in unpaused state. */ function __Pausable_init() internal onlyInitializing { __Pausable_init_unchained(); } function __Pausable_init_unchained() internal onlyInitializing { _paused = false; } /** * @dev Modifier to make a function callable only when the contract is not paused. * * Requirements: * * - The contract must not be paused. */ modifier whenNotPaused() { _requireNotPaused(); _; } /** * @dev Modifier to make a function callable only when the contract is paused. * * Requirements: * * - The contract must be paused. */ modifier whenPaused() { _requirePaused(); _; } /** * @dev Returns true if the contract is paused, and false otherwise. */ function paused() public view virtual returns (bool) { return _paused; } /** * @dev Throws if the contract is paused. */ function _requireNotPaused() internal view virtual { require(!paused(), "Pausable: paused"); } /** * @dev Throws if the contract is not paused. */ function _requirePaused() internal view virtual { require(paused(), "Pausable: not paused"); } /** * @dev Triggers stopped state. * * Requirements: * * - The contract must not be paused. */ function _pause() internal virtual whenNotPaused { _paused = true; emit Paused(_msgSender()); } /** * @dev Returns to normal state. * * Requirements: * * - The contract must be paused. */ function _unpause() internal virtual whenPaused { _paused = false; emit Unpaused(_msgSender()); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; import "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[50] private __gap; }
contracts/BIFI/interfaces/common/IFeeConfig.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; interface IFeeConfig { struct FeeCategory { uint256 total; uint256 beefy; uint256 call; uint256 strategist; string label; bool active; } struct AllFees { FeeCategory performance; uint256 deposit; uint256 withdraw; } function getFees(address strategy) external view returns (FeeCategory memory); function stratFeeId(address strategy) external view returns (uint256); function setStratFeeId(uint256 feeId) external; }
contracts/BIFI/interfaces/common/ISolidlyRouter.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; pragma experimental ABIEncoderV2; interface ISolidlyRouter { // Routes struct Routes { address from; address to; bool stable; } struct Route { address from; address to; bool stable; address factory; } function addLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, bool stable, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, bool stable, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, bool stable, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokensSimple( uint amountIn, uint amountOutMin, address tokenFrom, address tokenTo, bool stable, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Routes[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Route[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function getAmountOut(uint amountIn, address tokenIn, address tokenOut) external view returns (uint amount, bool stable); function getAmountsOut(uint amountIn, Routes[] memory routes) external view returns (uint[] memory amounts); function getAmountsOut(uint amountIn, Route[] memory routes) external view returns (uint[] memory amounts); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, address _factory, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function defaultFactory() external view returns (address); }
contracts/BIFI/interfaces/common/IWrappedNative.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IWrappedNative { function deposit() external payable; function withdraw(uint256 wad) external; }
contracts/BIFI/strategies/Common/StratFeeManagerInitializable.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol"; import "../../interfaces/common/IFeeConfig.sol"; contract StratFeeManagerInitializable is OwnableUpgradeable, PausableUpgradeable { struct CommonAddresses { address vault; address unirouter; address keeper; address strategist; address beefyFeeRecipient; address beefyFeeConfig; } // common addresses for the strategy address public vault; address public unirouter; address public keeper; address public strategist; address public beefyFeeRecipient; IFeeConfig public beefyFeeConfig; uint256 constant DIVISOR = 1 ether; uint256 constant public WITHDRAWAL_FEE_CAP = 50; uint256 constant public WITHDRAWAL_MAX = 10000; uint256 internal withdrawalFee; event SetStratFeeId(uint256 feeId); event SetWithdrawalFee(uint256 withdrawalFee); event SetVault(address vault); event SetUnirouter(address unirouter); event SetKeeper(address keeper); event SetStrategist(address strategist); event SetBeefyFeeRecipient(address beefyFeeRecipient); event SetBeefyFeeConfig(address beefyFeeConfig); function __StratFeeManager_init(CommonAddresses calldata _commonAddresses) internal onlyInitializing { __Ownable_init(); __Pausable_init(); vault = _commonAddresses.vault; unirouter = _commonAddresses.unirouter; keeper = _commonAddresses.keeper; strategist = _commonAddresses.strategist; beefyFeeRecipient = _commonAddresses.beefyFeeRecipient; beefyFeeConfig = IFeeConfig(_commonAddresses.beefyFeeConfig); withdrawalFee = 10; } // checks that caller is either owner or keeper. modifier onlyManager() { require(msg.sender == owner() || msg.sender == keeper, "!manager"); _; } // fetch fees from config contract function getFees() internal view returns (IFeeConfig.FeeCategory memory) { return beefyFeeConfig.getFees(address(this)); } // fetch fees from config contract and dynamic deposit/withdraw fees function getAllFees() external view returns (IFeeConfig.AllFees memory) { return IFeeConfig.AllFees(getFees(), depositFee(), withdrawFee()); } function getStratFeeId() external view returns (uint256) { return beefyFeeConfig.stratFeeId(address(this)); } function setStratFeeId(uint256 _feeId) external onlyManager { beefyFeeConfig.setStratFeeId(_feeId); emit SetStratFeeId(_feeId); } // adjust withdrawal fee function setWithdrawalFee(uint256 _fee) public onlyManager { require(_fee <= WITHDRAWAL_FEE_CAP, "!cap"); withdrawalFee = _fee; emit SetWithdrawalFee(_fee); } // set new vault (only for strategy upgrades) function setVault(address _vault) external onlyOwner { vault = _vault; emit SetVault(_vault); } // set new unirouter function setUnirouter(address _unirouter) external onlyOwner { unirouter = _unirouter; emit SetUnirouter(_unirouter); } // set new keeper to manage strat function setKeeper(address _keeper) external onlyManager { keeper = _keeper; emit SetKeeper(_keeper); } // set new strategist address to receive strat fees function setStrategist(address _strategist) external { require(msg.sender == strategist, "!strategist"); strategist = _strategist; emit SetStrategist(_strategist); } // set new beefy fee address to receive beefy fees function setBeefyFeeRecipient(address _beefyFeeRecipient) external onlyOwner { beefyFeeRecipient = _beefyFeeRecipient; emit SetBeefyFeeRecipient(_beefyFeeRecipient); } // set new fee config address to fetch fees function setBeefyFeeConfig(address _beefyFeeConfig) external onlyOwner { beefyFeeConfig = IFeeConfig(_beefyFeeConfig); emit SetBeefyFeeConfig(_beefyFeeConfig); } function depositFee() public virtual view returns (uint256) { return 0; } function withdrawFee() public virtual view returns (uint256) { return paused() ? 0 : withdrawalFee; } function beforeDeposit() external virtual {} }
@openzeppelin-4/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol) pragma solidity ^0.8.0; import "./IERC20.sol"; import "./extensions/IERC20Metadata.sol"; import "../../utils/Context.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * The default value of {decimals} is 18. To select a different value for * {decimals} you should overload it. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless this function is * overridden; * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom( address from, address to, uint256 amount ) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer( address from, address to, uint256 amount ) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance( address owner, address spender, uint256 amount ) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer( address from, address to, uint256 amount ) internal virtual {} }
contracts/BIFI/interfaces/curve/ICurveSwap.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface ICurveSwap { function remove_liquidity_one_coin(uint256 token_amount, int128 i, uint256 min_amount) external; function remove_liquidity_one_coin(address _pool, uint256 token_amount, int128 i, uint256 min_amount) external; function calc_withdraw_one_coin(uint256 tokenAmount, int128 i) external view returns (uint256); function coins(uint256 arg0) external view returns (address); function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount, bool _use_underlying) external; function add_liquidity(address _pool, uint256[2] memory amounts, uint256 min_mint_amount) external; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount, bool _use_underlying) external payable; function add_liquidity(address _pool, uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[6] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[6] memory amounts, uint256 min_mint_amount) external payable; function remove_liquidity(uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[6] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[6] memory min_amounts) external; function exchange(uint256 i, uint256 j, uint256 dx, uint256 min_dy) external; function balances(uint256 i) external view returns (uint256); function totalSupply() external view returns (uint256); }
contracts/BIFI/interfaces/curve/IGaugeFactory.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface IGaugeFactory { function mint(address _gauge) external; }
contracts/BIFI/interfaces/curve/IRewardsGauge.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IRewardsGauge { function balanceOf(address account) external view returns (uint256); function claimable_reward(address _addr, address _token) external view returns (uint256); function claim_rewards(address _addr) external; function claim_rewards() external; function deposit(uint256 _value) external; function withdraw(uint256 _value) external; function reward_contract() external view returns (address); function bal_pseudo_minter() external view returns (address); }
@openzeppelin-4/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 amount ) external returns (bool); }
@openzeppelin-4/contracts/token/ERC20/extensions/IERC20Metadata.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; /** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */ interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8); }
@openzeppelin-4/contracts/token/ERC20/extensions/draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/draft-IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender) + value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); uint256 newAllowance = oldAllowance - value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } } function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
@openzeppelin-4/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin-4/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } }
@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ function __Ownable_init() internal onlyInitializing { __Ownable_init_unchained(); } function __Ownable_init_unchained() internal onlyInitializing { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol) pragma solidity ^0.8.2; import "../../utils/AddressUpgradeable.sol"; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ``` * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. * @custom:oz-retyped-from bool */ uint8 private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint8 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a * constructor. * * Emits an {Initialized} event. */ modifier initializer() { bool isTopLevelCall = !_initializing; require( (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1), "Initializable: contract is already initialized" ); _initialized = 1; if (isTopLevelCall) { _initializing = true; } _; if (isTopLevelCall) { _initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: setting the version to 255 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint8 version) { require(!_initializing && _initialized < version, "Initializable: contract is already initialized"); _initialized = version; _initializing = true; _; _initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { require(_initializing, "Initializable: contract is not initializing"); _; } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { require(!_initializing, "Initializable: contract is initializing"); if (_initialized < type(uint8).max) { _initialized = type(uint8).max; emit Initialized(type(uint8).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint8) { return _initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _initializing; } }
@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which allows children to implement an emergency stop * mechanism that can be triggered by an authorized account. * * This module is used through inheritance. It will make available the * modifiers `whenNotPaused` and `whenPaused`, which can be applied to * the functions of your contract. Note that they will not be pausable by * simply including this module, only once the modifiers are put in place. */ abstract contract PausableUpgradeable is Initializable, ContextUpgradeable { /** * @dev Emitted when the pause is triggered by `account`. */ event Paused(address account); /** * @dev Emitted when the pause is lifted by `account`. */ event Unpaused(address account); bool private _paused; /** * @dev Initializes the contract in unpaused state. */ function __Pausable_init() internal onlyInitializing { __Pausable_init_unchained(); } function __Pausable_init_unchained() internal onlyInitializing { _paused = false; } /** * @dev Modifier to make a function callable only when the contract is not paused. * * Requirements: * * - The contract must not be paused. */ modifier whenNotPaused() { _requireNotPaused(); _; } /** * @dev Modifier to make a function callable only when the contract is paused. * * Requirements: * * - The contract must be paused. */ modifier whenPaused() { _requirePaused(); _; } /** * @dev Returns true if the contract is paused, and false otherwise. */ function paused() public view virtual returns (bool) { return _paused; } /** * @dev Throws if the contract is paused. */ function _requireNotPaused() internal view virtual { require(!paused(), "Pausable: paused"); } /** * @dev Throws if the contract is not paused. */ function _requirePaused() internal view virtual { require(paused(), "Pausable: not paused"); } /** * @dev Triggers stopped state. * * Requirements: * * - The contract must not be paused. */ function _pause() internal virtual whenNotPaused { _paused = true; emit Paused(_msgSender()); } /** * @dev Returns to normal state. * * Requirements: * * - The contract must be paused. */ function _unpause() internal virtual whenPaused { _paused = false; emit Unpaused(_msgSender()); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; import "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[50] private __gap; }
contracts/BIFI/interfaces/common/IFeeConfig.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; interface IFeeConfig { struct FeeCategory { uint256 total; uint256 beefy; uint256 call; uint256 strategist; string label; bool active; } struct AllFees { FeeCategory performance; uint256 deposit; uint256 withdraw; } function getFees(address strategy) external view returns (FeeCategory memory); function stratFeeId(address strategy) external view returns (uint256); function setStratFeeId(uint256 feeId) external; }
contracts/BIFI/interfaces/common/ISolidlyRouter.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; pragma experimental ABIEncoderV2; interface ISolidlyRouter { // Routes struct Routes { address from; address to; bool stable; } struct Route { address from; address to; bool stable; address factory; } function addLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, bool stable, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, bool stable, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, bool stable, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokensSimple( uint amountIn, uint amountOutMin, address tokenFrom, address tokenTo, bool stable, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Routes[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Route[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function getAmountOut(uint amountIn, address tokenIn, address tokenOut) external view returns (uint amount, bool stable); function getAmountsOut(uint amountIn, Routes[] memory routes) external view returns (uint[] memory amounts); function getAmountsOut(uint amountIn, Route[] memory routes) external view returns (uint[] memory amounts); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, address _factory, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function defaultFactory() external view returns (address); }
contracts/BIFI/interfaces/common/IWrappedNative.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IWrappedNative { function deposit() external payable; function withdraw(uint256 wad) external; }
contracts/BIFI/strategies/Common/StratFeeManagerInitializable.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol"; import "../../interfaces/common/IFeeConfig.sol"; contract StratFeeManagerInitializable is OwnableUpgradeable, PausableUpgradeable { struct CommonAddresses { address vault; address unirouter; address keeper; address strategist; address beefyFeeRecipient; address beefyFeeConfig; } // common addresses for the strategy address public vault; address public unirouter; address public keeper; address public strategist; address public beefyFeeRecipient; IFeeConfig public beefyFeeConfig; uint256 constant DIVISOR = 1 ether; uint256 constant public WITHDRAWAL_FEE_CAP = 50; uint256 constant public WITHDRAWAL_MAX = 10000; uint256 internal withdrawalFee; event SetStratFeeId(uint256 feeId); event SetWithdrawalFee(uint256 withdrawalFee); event SetVault(address vault); event SetUnirouter(address unirouter); event SetKeeper(address keeper); event SetStrategist(address strategist); event SetBeefyFeeRecipient(address beefyFeeRecipient); event SetBeefyFeeConfig(address beefyFeeConfig); function __StratFeeManager_init(CommonAddresses calldata _commonAddresses) internal onlyInitializing { __Ownable_init(); __Pausable_init(); vault = _commonAddresses.vault; unirouter = _commonAddresses.unirouter; keeper = _commonAddresses.keeper; strategist = _commonAddresses.strategist; beefyFeeRecipient = _commonAddresses.beefyFeeRecipient; beefyFeeConfig = IFeeConfig(_commonAddresses.beefyFeeConfig); withdrawalFee = 10; } // checks that caller is either owner or keeper. modifier onlyManager() { require(msg.sender == owner() || msg.sender == keeper, "!manager"); _; } // fetch fees from config contract function getFees() internal view returns (IFeeConfig.FeeCategory memory) { return beefyFeeConfig.getFees(address(this)); } // fetch fees from config contract and dynamic deposit/withdraw fees function getAllFees() external view returns (IFeeConfig.AllFees memory) { return IFeeConfig.AllFees(getFees(), depositFee(), withdrawFee()); } function getStratFeeId() external view returns (uint256) { return beefyFeeConfig.stratFeeId(address(this)); } function setStratFeeId(uint256 _feeId) external onlyManager { beefyFeeConfig.setStratFeeId(_feeId); emit SetStratFeeId(_feeId); } // adjust withdrawal fee function setWithdrawalFee(uint256 _fee) public onlyManager { require(_fee <= WITHDRAWAL_FEE_CAP, "!cap"); withdrawalFee = _fee; emit SetWithdrawalFee(_fee); } // set new vault (only for strategy upgrades) function setVault(address _vault) external onlyOwner { vault = _vault; emit SetVault(_vault); } // set new unirouter function setUnirouter(address _unirouter) external onlyOwner { unirouter = _unirouter; emit SetUnirouter(_unirouter); } // set new keeper to manage strat function setKeeper(address _keeper) external onlyManager { keeper = _keeper; emit SetKeeper(_keeper); } // set new strategist address to receive strat fees function setStrategist(address _strategist) external { require(msg.sender == strategist, "!strategist"); strategist = _strategist; emit SetStrategist(_strategist); } // set new beefy fee address to receive beefy fees function setBeefyFeeRecipient(address _beefyFeeRecipient) external onlyOwner { beefyFeeRecipient = _beefyFeeRecipient; emit SetBeefyFeeRecipient(_beefyFeeRecipient); } // set new fee config address to fetch fees function setBeefyFeeConfig(address _beefyFeeConfig) external onlyOwner { beefyFeeConfig = IFeeConfig(_beefyFeeConfig); emit SetBeefyFeeConfig(_beefyFeeConfig); } function depositFee() public virtual view returns (uint256) { return 0; } function withdrawFee() public virtual view returns (uint256) { return paused() ? 0 : withdrawalFee; } function beforeDeposit() external virtual {} }
@openzeppelin-4/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol) pragma solidity ^0.8.0; import "./IERC20.sol"; import "./extensions/IERC20Metadata.sol"; import "../../utils/Context.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * The default value of {decimals} is 18. To select a different value for * {decimals} you should overload it. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless this function is * overridden; * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom( address from, address to, uint256 amount ) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer( address from, address to, uint256 amount ) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance( address owner, address spender, uint256 amount ) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer( address from, address to, uint256 amount ) internal virtual {} }
contracts/BIFI/interfaces/curve/ICurveSwap.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface ICurveSwap { function remove_liquidity_one_coin(uint256 token_amount, int128 i, uint256 min_amount) external; function remove_liquidity_one_coin(address _pool, uint256 token_amount, int128 i, uint256 min_amount) external; function calc_withdraw_one_coin(uint256 tokenAmount, int128 i) external view returns (uint256); function coins(uint256 arg0) external view returns (address); function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount, bool _use_underlying) external; function add_liquidity(address _pool, uint256[2] memory amounts, uint256 min_mint_amount) external; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount, bool _use_underlying) external payable; function add_liquidity(address _pool, uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[6] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[6] memory amounts, uint256 min_mint_amount) external payable; function remove_liquidity(uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[6] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[6] memory min_amounts) external; function exchange(uint256 i, uint256 j, uint256 dx, uint256 min_dy) external; function balances(uint256 i) external view returns (uint256); function totalSupply() external view returns (uint256); }
contracts/BIFI/interfaces/curve/IGaugeFactory.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface IGaugeFactory { function mint(address _gauge) external; }
contracts/BIFI/interfaces/curve/IRewardsGauge.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IRewardsGauge { function balanceOf(address account) external view returns (uint256); function claimable_reward(address _addr, address _token) external view returns (uint256); function claim_rewards(address _addr) external; function claim_rewards() external; function deposit(uint256 _value) external; function withdraw(uint256 _value) external; function reward_contract() external view returns (address); function bal_pseudo_minter() external view returns (address); }
@openzeppelin-4/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 amount ) external returns (bool); }
@openzeppelin-4/contracts/token/ERC20/extensions/IERC20Metadata.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; /** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */ interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8); }
@openzeppelin-4/contracts/token/ERC20/extensions/draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/draft-IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender) + value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); uint256 newAllowance = oldAllowance - value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } } function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
@openzeppelin-4/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin-4/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } }
@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ function __Ownable_init() internal onlyInitializing { __Ownable_init_unchained(); } function __Ownable_init_unchained() internal onlyInitializing { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol) pragma solidity ^0.8.2; import "../../utils/AddressUpgradeable.sol"; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ``` * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. * @custom:oz-retyped-from bool */ uint8 private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint8 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a * constructor. * * Emits an {Initialized} event. */ modifier initializer() { bool isTopLevelCall = !_initializing; require( (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1), "Initializable: contract is already initialized" ); _initialized = 1; if (isTopLevelCall) { _initializing = true; } _; if (isTopLevelCall) { _initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: setting the version to 255 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint8 version) { require(!_initializing && _initialized < version, "Initializable: contract is already initialized"); _initialized = version; _initializing = true; _; _initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { require(_initializing, "Initializable: contract is not initializing"); _; } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { require(!_initializing, "Initializable: contract is initializing"); if (_initialized < type(uint8).max) { _initialized = type(uint8).max; emit Initialized(type(uint8).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint8) { return _initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _initializing; } }
@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which allows children to implement an emergency stop * mechanism that can be triggered by an authorized account. * * This module is used through inheritance. It will make available the * modifiers `whenNotPaused` and `whenPaused`, which can be applied to * the functions of your contract. Note that they will not be pausable by * simply including this module, only once the modifiers are put in place. */ abstract contract PausableUpgradeable is Initializable, ContextUpgradeable { /** * @dev Emitted when the pause is triggered by `account`. */ event Paused(address account); /** * @dev Emitted when the pause is lifted by `account`. */ event Unpaused(address account); bool private _paused; /** * @dev Initializes the contract in unpaused state. */ function __Pausable_init() internal onlyInitializing { __Pausable_init_unchained(); } function __Pausable_init_unchained() internal onlyInitializing { _paused = false; } /** * @dev Modifier to make a function callable only when the contract is not paused. * * Requirements: * * - The contract must not be paused. */ modifier whenNotPaused() { _requireNotPaused(); _; } /** * @dev Modifier to make a function callable only when the contract is paused. * * Requirements: * * - The contract must be paused. */ modifier whenPaused() { _requirePaused(); _; } /** * @dev Returns true if the contract is paused, and false otherwise. */ function paused() public view virtual returns (bool) { return _paused; } /** * @dev Throws if the contract is paused. */ function _requireNotPaused() internal view virtual { require(!paused(), "Pausable: paused"); } /** * @dev Throws if the contract is not paused. */ function _requirePaused() internal view virtual { require(paused(), "Pausable: not paused"); } /** * @dev Triggers stopped state. * * Requirements: * * - The contract must not be paused. */ function _pause() internal virtual whenNotPaused { _paused = true; emit Paused(_msgSender()); } /** * @dev Returns to normal state. * * Requirements: * * - The contract must be paused. */ function _unpause() internal virtual whenPaused { _paused = false; emit Unpaused(_msgSender()); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; import "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[50] private __gap; }
contracts/BIFI/interfaces/common/IFeeConfig.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; interface IFeeConfig { struct FeeCategory { uint256 total; uint256 beefy; uint256 call; uint256 strategist; string label; bool active; } struct AllFees { FeeCategory performance; uint256 deposit; uint256 withdraw; } function getFees(address strategy) external view returns (FeeCategory memory); function stratFeeId(address strategy) external view returns (uint256); function setStratFeeId(uint256 feeId) external; }
contracts/BIFI/interfaces/common/ISolidlyRouter.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; pragma experimental ABIEncoderV2; interface ISolidlyRouter { // Routes struct Routes { address from; address to; bool stable; } struct Route { address from; address to; bool stable; address factory; } function addLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, bool stable, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, bool stable, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, bool stable, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokensSimple( uint amountIn, uint amountOutMin, address tokenFrom, address tokenTo, bool stable, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Routes[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Route[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function getAmountOut(uint amountIn, address tokenIn, address tokenOut) external view returns (uint amount, bool stable); function getAmountsOut(uint amountIn, Routes[] memory routes) external view returns (uint[] memory amounts); function getAmountsOut(uint amountIn, Route[] memory routes) external view returns (uint[] memory amounts); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, address _factory, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function defaultFactory() external view returns (address); }
contracts/BIFI/interfaces/common/IWrappedNative.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IWrappedNative { function deposit() external payable; function withdraw(uint256 wad) external; }
contracts/BIFI/strategies/Common/StratFeeManagerInitializable.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol"; import "../../interfaces/common/IFeeConfig.sol"; contract StratFeeManagerInitializable is OwnableUpgradeable, PausableUpgradeable { struct CommonAddresses { address vault; address unirouter; address keeper; address strategist; address beefyFeeRecipient; address beefyFeeConfig; } // common addresses for the strategy address public vault; address public unirouter; address public keeper; address public strategist; address public beefyFeeRecipient; IFeeConfig public beefyFeeConfig; uint256 constant DIVISOR = 1 ether; uint256 constant public WITHDRAWAL_FEE_CAP = 50; uint256 constant public WITHDRAWAL_MAX = 10000; uint256 internal withdrawalFee; event SetStratFeeId(uint256 feeId); event SetWithdrawalFee(uint256 withdrawalFee); event SetVault(address vault); event SetUnirouter(address unirouter); event SetKeeper(address keeper); event SetStrategist(address strategist); event SetBeefyFeeRecipient(address beefyFeeRecipient); event SetBeefyFeeConfig(address beefyFeeConfig); function __StratFeeManager_init(CommonAddresses calldata _commonAddresses) internal onlyInitializing { __Ownable_init(); __Pausable_init(); vault = _commonAddresses.vault; unirouter = _commonAddresses.unirouter; keeper = _commonAddresses.keeper; strategist = _commonAddresses.strategist; beefyFeeRecipient = _commonAddresses.beefyFeeRecipient; beefyFeeConfig = IFeeConfig(_commonAddresses.beefyFeeConfig); withdrawalFee = 10; } // checks that caller is either owner or keeper. modifier onlyManager() { require(msg.sender == owner() || msg.sender == keeper, "!manager"); _; } // fetch fees from config contract function getFees() internal view returns (IFeeConfig.FeeCategory memory) { return beefyFeeConfig.getFees(address(this)); } // fetch fees from config contract and dynamic deposit/withdraw fees function getAllFees() external view returns (IFeeConfig.AllFees memory) { return IFeeConfig.AllFees(getFees(), depositFee(), withdrawFee()); } function getStratFeeId() external view returns (uint256) { return beefyFeeConfig.stratFeeId(address(this)); } function setStratFeeId(uint256 _feeId) external onlyManager { beefyFeeConfig.setStratFeeId(_feeId); emit SetStratFeeId(_feeId); } // adjust withdrawal fee function setWithdrawalFee(uint256 _fee) public onlyManager { require(_fee <= WITHDRAWAL_FEE_CAP, "!cap"); withdrawalFee = _fee; emit SetWithdrawalFee(_fee); } // set new vault (only for strategy upgrades) function setVault(address _vault) external onlyOwner { vault = _vault; emit SetVault(_vault); } // set new unirouter function setUnirouter(address _unirouter) external onlyOwner { unirouter = _unirouter; emit SetUnirouter(_unirouter); } // set new keeper to manage strat function setKeeper(address _keeper) external onlyManager { keeper = _keeper; emit SetKeeper(_keeper); } // set new strategist address to receive strat fees function setStrategist(address _strategist) external { require(msg.sender == strategist, "!strategist"); strategist = _strategist; emit SetStrategist(_strategist); } // set new beefy fee address to receive beefy fees function setBeefyFeeRecipient(address _beefyFeeRecipient) external onlyOwner { beefyFeeRecipient = _beefyFeeRecipient; emit SetBeefyFeeRecipient(_beefyFeeRecipient); } // set new fee config address to fetch fees function setBeefyFeeConfig(address _beefyFeeConfig) external onlyOwner { beefyFeeConfig = IFeeConfig(_beefyFeeConfig); emit SetBeefyFeeConfig(_beefyFeeConfig); } function depositFee() public virtual view returns (uint256) { return 0; } function withdrawFee() public virtual view returns (uint256) { return paused() ? 0 : withdrawalFee; } function beforeDeposit() external virtual {} }
@openzeppelin-4/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol) pragma solidity ^0.8.0; import "./IERC20.sol"; import "./extensions/IERC20Metadata.sol"; import "../../utils/Context.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * The default value of {decimals} is 18. To select a different value for * {decimals} you should overload it. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless this function is * overridden; * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom( address from, address to, uint256 amount ) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer( address from, address to, uint256 amount ) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance( address owner, address spender, uint256 amount ) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer( address from, address to, uint256 amount ) internal virtual {} }
contracts/BIFI/interfaces/curve/ICurveSwap.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface ICurveSwap { function remove_liquidity_one_coin(uint256 token_amount, int128 i, uint256 min_amount) external; function remove_liquidity_one_coin(address _pool, uint256 token_amount, int128 i, uint256 min_amount) external; function calc_withdraw_one_coin(uint256 tokenAmount, int128 i) external view returns (uint256); function coins(uint256 arg0) external view returns (address); function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[2] memory amounts, uint256 min_mint_amount, bool _use_underlying) external; function add_liquidity(address _pool, uint256[2] memory amounts, uint256 min_mint_amount) external; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[3] memory amounts, uint256 min_mint_amount, bool _use_underlying) external payable; function add_liquidity(address _pool, uint256[3] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[4] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[5] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(uint256[6] memory amounts, uint256 min_mint_amount) external payable; function add_liquidity(address _pool, uint256[6] memory amounts, uint256 min_mint_amount) external payable; function remove_liquidity(uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[2] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[3] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[4] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[5] memory min_amounts) external; function remove_liquidity(uint256 amount, uint256[6] memory min_amounts) external; function remove_liquidity(address _pool, uint256 amount, uint256[6] memory min_amounts) external; function exchange(uint256 i, uint256 j, uint256 dx, uint256 min_dy) external; function balances(uint256 i) external view returns (uint256); function totalSupply() external view returns (uint256); }
contracts/BIFI/interfaces/curve/IGaugeFactory.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0; interface IGaugeFactory { function mint(address _gauge) external; }
contracts/BIFI/interfaces/curve/IRewardsGauge.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IRewardsGauge { function balanceOf(address account) external view returns (uint256); function claimable_reward(address _addr, address _token) external view returns (uint256); function claim_rewards(address _addr) external; function claim_rewards() external; function deposit(uint256 _value) external; function withdraw(uint256 _value) external; function reward_contract() external view returns (address); function bal_pseudo_minter() external view returns (address); }
@openzeppelin-4/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 amount ) external returns (bool); }
@openzeppelin-4/contracts/token/ERC20/extensions/IERC20Metadata.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; /** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */ interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8); }
@openzeppelin-4/contracts/token/ERC20/extensions/draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/draft-IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender) + value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); uint256 newAllowance = oldAllowance - value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } } function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
@openzeppelin-4/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin-4/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } }
@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ function __Ownable_init() internal onlyInitializing { __Ownable_init_unchained(); } function __Ownable_init_unchained() internal onlyInitializing { _transferOwnership(_msgSender()); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { require(owner() == _msgSender(), "Ownable: caller is not the owner"); } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { address oldOwner = _owner; _owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol) pragma solidity ^0.8.2; import "../../utils/AddressUpgradeable.sol"; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ``` * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Indicates that the contract has been initialized. * @custom:oz-retyped-from bool */ uint8 private _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private _initializing; /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint8 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a * constructor. * * Emits an {Initialized} event. */ modifier initializer() { bool isTopLevelCall = !_initializing; require( (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1), "Initializable: contract is already initialized" ); _initialized = 1; if (isTopLevelCall) { _initializing = true; } _; if (isTopLevelCall) { _initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: setting the version to 255 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint8 version) { require(!_initializing && _initialized < version, "Initializable: contract is already initialized"); _initialized = version; _initializing = true; _; _initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { require(_initializing, "Initializable: contract is not initializing"); _; } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { require(!_initializing, "Initializable: contract is initializing"); if (_initialized < type(uint8).max) { _initialized = type(uint8).max; emit Initialized(type(uint8).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint8) { return _initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _initializing; } }
@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol) pragma solidity ^0.8.0; import "../utils/ContextUpgradeable.sol"; import "../proxy/utils/Initializable.sol"; /** * @dev Contract module which allows children to implement an emergency stop * mechanism that can be triggered by an authorized account. * * This module is used through inheritance. It will make available the * modifiers `whenNotPaused` and `whenPaused`, which can be applied to * the functions of your contract. Note that they will not be pausable by * simply including this module, only once the modifiers are put in place. */ abstract contract PausableUpgradeable is Initializable, ContextUpgradeable { /** * @dev Emitted when the pause is triggered by `account`. */ event Paused(address account); /** * @dev Emitted when the pause is lifted by `account`. */ event Unpaused(address account); bool private _paused; /** * @dev Initializes the contract in unpaused state. */ function __Pausable_init() internal onlyInitializing { __Pausable_init_unchained(); } function __Pausable_init_unchained() internal onlyInitializing { _paused = false; } /** * @dev Modifier to make a function callable only when the contract is not paused. * * Requirements: * * - The contract must not be paused. */ modifier whenNotPaused() { _requireNotPaused(); _; } /** * @dev Modifier to make a function callable only when the contract is paused. * * Requirements: * * - The contract must be paused. */ modifier whenPaused() { _requirePaused(); _; } /** * @dev Returns true if the contract is paused, and false otherwise. */ function paused() public view virtual returns (bool) { return _paused; } /** * @dev Throws if the contract is paused. */ function _requireNotPaused() internal view virtual { require(!paused(), "Pausable: paused"); } /** * @dev Throws if the contract is not paused. */ function _requirePaused() internal view virtual { require(paused(), "Pausable: not paused"); } /** * @dev Triggers stopped state. * * Requirements: * * - The contract must not be paused. */ function _pause() internal virtual whenNotPaused { _paused = true; emit Paused(_msgSender()); } /** * @dev Returns to normal state. * * Requirements: * * - The contract must be paused. */ function _unpause() internal virtual whenPaused { _paused = false; emit Unpaused(_msgSender()); } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[49] private __gap; }
@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library AddressUpgradeable { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; import "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } /** * @dev This empty reserved space is put in place to allow future versions to add new * variables without shifting down storage in the inheritance chain. * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps */ uint256[50] private __gap; }
contracts/BIFI/interfaces/common/IFeeConfig.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; interface IFeeConfig { struct FeeCategory { uint256 total; uint256 beefy; uint256 call; uint256 strategist; string label; bool active; } struct AllFees { FeeCategory performance; uint256 deposit; uint256 withdraw; } function getFees(address strategy) external view returns (FeeCategory memory); function stratFeeId(address strategy) external view returns (uint256); function setStratFeeId(uint256 feeId) external; }
contracts/BIFI/interfaces/common/ISolidlyRouter.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; pragma experimental ABIEncoderV2; interface ISolidlyRouter { // Routes struct Routes { address from; address to; bool stable; } struct Route { address from; address to; bool stable; address factory; } function addLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, bool stable, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, bool stable, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, bool stable, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokensSimple( uint amountIn, uint amountOutMin, address tokenFrom, address tokenTo, bool stable, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Routes[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, Route[] memory route, address to, uint deadline ) external returns (uint[] memory amounts); function getAmountOut(uint amountIn, address tokenIn, address tokenOut) external view returns (uint amount, bool stable); function getAmountsOut(uint amountIn, Routes[] memory routes) external view returns (uint[] memory amounts); function getAmountsOut(uint amountIn, Route[] memory routes) external view returns (uint[] memory amounts); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function quoteAddLiquidity( address tokenA, address tokenB, bool stable, address _factory, uint amountADesired, uint amountBDesired ) external view returns (uint amountA, uint amountB, uint liquidity); function defaultFactory() external view returns (address); }
contracts/BIFI/interfaces/common/IWrappedNative.sol
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.9.0; interface IWrappedNative { function deposit() external payable; function withdraw(uint256 wad) external; }
contracts/BIFI/strategies/Common/StratFeeManagerInitializable.sol
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol"; import "../../interfaces/common/IFeeConfig.sol"; contract StratFeeManagerInitializable is OwnableUpgradeable, PausableUpgradeable { struct CommonAddresses { address vault; address unirouter; address keeper; address strategist; address beefyFeeRecipient; address beefyFeeConfig; } // common addresses for the strategy address public vault; address public unirouter; address public keeper; address public strategist; address public beefyFeeRecipient; IFeeConfig public beefyFeeConfig; uint256 constant DIVISOR = 1 ether; uint256 constant public WITHDRAWAL_FEE_CAP = 50; uint256 constant public WITHDRAWAL_MAX = 10000; uint256 internal withdrawalFee; event SetStratFeeId(uint256 feeId); event SetWithdrawalFee(uint256 withdrawalFee); event SetVault(address vault); event SetUnirouter(address unirouter); event SetKeeper(address keeper); event SetStrategist(address strategist); event SetBeefyFeeRecipient(address beefyFeeRecipient); event SetBeefyFeeConfig(address beefyFeeConfig); function __StratFeeManager_init(CommonAddresses calldata _commonAddresses) internal onlyInitializing { __Ownable_init(); __Pausable_init(); vault = _commonAddresses.vault; unirouter = _commonAddresses.unirouter; keeper = _commonAddresses.keeper; strategist = _commonAddresses.strategist; beefyFeeRecipient = _commonAddresses.beefyFeeRecipient; beefyFeeConfig = IFeeConfig(_commonAddresses.beefyFeeConfig); withdrawalFee = 10; } // checks that caller is either owner or keeper. modifier onlyManager() { require(msg.sender == owner() || msg.sender == keeper, "!manager"); _; } // fetch fees from config contract function getFees() internal view returns (IFeeConfig.FeeCategory memory) { return beefyFeeConfig.getFees(address(this)); } // fetch fees from config contract and dynamic deposit/withdraw fees function getAllFees() external view returns (IFeeConfig.AllFees memory) { return IFeeConfig.AllFees(getFees(), depositFee(), withdrawFee()); } function getStratFeeId() external view returns (uint256) { return beefyFeeConfig.stratFeeId(address(this)); } function setStratFeeId(uint256 _feeId) external onlyManager { beefyFeeConfig.setStratFeeId(_feeId); emit SetStratFeeId(_feeId); } // adjust withdrawal fee function setWithdrawalFee(uint256 _fee) public onlyManager { require(_fee <= WITHDRAWAL_FEE_CAP, "!cap"); withdrawalFee = _fee; emit SetWithdrawalFee(_fee); } // set new vault (only for strategy upgrades) function setVault(address _vault) external onlyOwner { vault = _vault; emit SetVault(_vault); } // set new unirouter function setUnirouter(address _unirouter) external onlyOwner { unirouter = _unirouter; emit SetUnirouter(_unirouter); } // set new keeper to manage strat function setKeeper(address _keeper) external onlyManager { keeper = _keeper; emit SetKeeper(_keeper); } // set new strategist address to receive strat fees function setStrategist(address _strategist) external { require(msg.sender == strategist, "!strategist"); strategist = _strategist; emit SetStrategist(_strategist); } // set new beefy fee address to receive beefy fees function setBeefyFeeRecipient(address _beefyFeeRecipient) external onlyOwner { beefyFeeRecipient = _beefyFeeRecipient; emit SetBeefyFeeRecipient(_beefyFeeRecipient); } // set new fee config address to fetch fees function setBeefyFeeConfig(address _beefyFeeConfig) external onlyOwner { beefyFeeConfig = IFeeConfig(_beefyFeeConfig); emit SetBeefyFeeConfig(_beefyFeeConfig); } function depositFee() public virtual view returns (uint256) { return 0; } function withdrawFee() public virtual view returns (uint256) { return paused() ? 0 : withdrawalFee; } function beforeDeposit() external virtual {} }
Contract ABI
[{"type":"event","name":"ChargedFees","inputs":[{"type":"uint256","name":"callFees","internalType":"uint256","indexed":false},{"type":"uint256","name":"beefyFees","internalType":"uint256","indexed":false},{"type":"uint256","name":"strategistFees","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"Deposit","inputs":[{"type":"uint256","name":"tvl","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"Initialized","inputs":[{"type":"uint8","name":"version","internalType":"uint8","indexed":false}],"anonymous":false},{"type":"event","name":"OwnershipTransferred","inputs":[{"type":"address","name":"previousOwner","internalType":"address","indexed":true},{"type":"address","name":"newOwner","internalType":"address","indexed":true}],"anonymous":false},{"type":"event","name":"Paused","inputs":[{"type":"address","name":"account","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"SetBeefyFeeConfig","inputs":[{"type":"address","name":"beefyFeeConfig","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"SetBeefyFeeRecipient","inputs":[{"type":"address","name":"beefyFeeRecipient","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"SetKeeper","inputs":[{"type":"address","name":"keeper","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"SetStratFeeId","inputs":[{"type":"uint256","name":"feeId","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"SetStrategist","inputs":[{"type":"address","name":"strategist","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"SetUnirouter","inputs":[{"type":"address","name":"unirouter","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"SetVault","inputs":[{"type":"address","name":"vault","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"SetWithdrawalFee","inputs":[{"type":"uint256","name":"withdrawalFee","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"StratHarvest","inputs":[{"type":"address","name":"harvester","internalType":"address","indexed":true},{"type":"uint256","name":"wantHarvested","internalType":"uint256","indexed":false},{"type":"uint256","name":"tvl","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"Unpaused","inputs":[{"type":"address","name":"account","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"Withdraw","inputs":[{"type":"uint256","name":"tvl","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"WITHDRAWAL_FEE_CAP","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"WITHDRAWAL_MAX","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"balanceOf","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"balanceOfPool","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"balanceOfWant","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"contract IFeeConfig"}],"name":"beefyFeeConfig","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"beefyFeeRecipient","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"beforeDeposit","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"callReward","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"deposit","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"depositFee","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"depositIndex","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"depositToken","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"tuple","name":"","internalType":"struct IFeeConfig.AllFees","components":[{"type":"tuple","name":"performance","internalType":"struct IFeeConfig.FeeCategory","components":[{"type":"uint256","name":"total","internalType":"uint256"},{"type":"uint256","name":"beefy","internalType":"uint256"},{"type":"uint256","name":"call","internalType":"uint256"},{"type":"uint256","name":"strategist","internalType":"uint256"},{"type":"string","name":"label","internalType":"string"},{"type":"bool","name":"active","internalType":"bool"}]},{"type":"uint256","name":"deposit","internalType":"uint256"},{"type":"uint256","name":"withdraw","internalType":"uint256"}]}],"name":"getAllFees","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"getStratFeeId","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"harvest","inputs":[{"type":"address","name":"callFeeRecipient","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"harvest","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"harvestOnDeposit","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"initialize","inputs":[{"type":"address","name":"_want","internalType":"address"},{"type":"address","name":"_gauge","internalType":"address"},{"type":"address","name":"_pool","internalType":"address"},{"type":"uint256[]","name":"_params","internalType":"uint256[]"},{"type":"tuple[]","name":"_nativeToDeposit","internalType":"struct ISolidlyRouter.Routes[]","components":[{"type":"address","name":"from","internalType":"address"},{"type":"address","name":"to","internalType":"address"},{"type":"bool","name":"stable","internalType":"bool"}]},{"type":"tuple","name":"_commonAddresses","internalType":"struct StratFeeManagerInitializable.CommonAddresses","components":[{"type":"address","name":"vault","internalType":"address"},{"type":"address","name":"unirouter","internalType":"address"},{"type":"address","name":"keeper","internalType":"address"},{"type":"address","name":"strategist","internalType":"address"},{"type":"address","name":"beefyFeeRecipient","internalType":"address"},{"type":"address","name":"beefyFeeConfig","internalType":"address"}]}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"keeper","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"lastHarvest","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"native","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address[]","name":"","internalType":"address[]"}],"name":"nativeToDeposit","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"from","internalType":"address"},{"type":"address","name":"to","internalType":"address"},{"type":"bool","name":"stable","internalType":"bool"}],"name":"nativeToDepositRoute","inputs":[{"type":"uint256","name":"","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"output","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"owner","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"panic","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"pause","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"paused","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"pool","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"poolSize","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"renounceOwnership","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"retireStrat","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"rewardsAvailable","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"rewardsGauge","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setBeefyFeeConfig","inputs":[{"type":"address","name":"_beefyFeeConfig","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setBeefyFeeRecipient","inputs":[{"type":"address","name":"_beefyFeeRecipient","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setHarvestOnDeposit","inputs":[{"type":"bool","name":"_harvestOnDeposit","internalType":"bool"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setKeeper","inputs":[{"type":"address","name":"_keeper","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setStratFeeId","inputs":[{"type":"uint256","name":"_feeId","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setStrategist","inputs":[{"type":"address","name":"_strategist","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setUnirouter","inputs":[{"type":"address","name":"_unirouter","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setVault","inputs":[{"type":"address","name":"_vault","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"setWithdrawalFee","inputs":[{"type":"uint256","name":"_fee","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"strategist","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"transferOwnership","inputs":[{"type":"address","name":"newOwner","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"unirouter","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"unpause","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"useMetapool","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"useUnderlying","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"vault","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"want","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"withdraw","inputs":[{"type":"uint256","name":"_amount","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"withdrawFee","inputs":[]},{"type":"receive","stateMutability":"payable"}]
Contract Creation Code
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
Deployed ByteCode
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